F065
Dyamèt Nominal Tiyo Eksteryè a:
- Rekòmande pa Estanda Antrepriz Ekipman Kriyojenik HL la. Li kapab tou pwodui selon egzijans kliyan an.
- Presyon konsepsyon:
- Rekòmande ≤ 16 bar. Oubyen chwazi Kalite Koneksyon Soude (≤40 bar).
- Materyèl tiyo ekstèn lan
San okenn egzijans espesyal, materyèl tiyo enteryè a ak tiyo ekstèn lan pral chwazi menm jan an.
3.1.3 Kalite Koneksyon Soude
modèl
Koneksyon
Kalite
Dyamèt nominal tiyo enteryè a
Presyon Konsepsyon
Materyèl
nan tiyo enteryè
Estanda
Remak
W010
00X
Kalite Koneksyon Soude pou Tiyo Fleksib Izole Vakyòm Estatik
DN10, 3/8"
8 ~ 40 ba
Seri 300 an asye pur
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | Dyamèt Nominal Tiyo Eksteryè a: | |
| Presyon Konsepsyon | Materyèl tiyo enteryè a. | A se 304, | DN40, 1-1/2" | C se 316, |
| D se 316L, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | Presyon Konsepsyon |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| Rekòmande ≤ DN25 oswa 1". Oubyen chwazi Kalite Koneksyon Bayonèt Vacuum ak Flanj ak Boulon (soti nan DN10, 3/8" rive nan DN80, 3"), Kalite Koneksyon Soude (soti nan DN10, 3/8" rive nan DN150, 6") | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Estanda | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | Dyamèt Nominal Tiyo Eksteryè a: |
| Rekòmande pa Estanda Antrepriz Ekipman Kriyojenik HL la. Li kapab tou pwodui selon egzijans kliyan an. | Materyèl tiyo ekstèn lan | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Kalite | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Estanda | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Presyon konsepsyon. | / | DN25, 1" | DN25, 1" | / | |
| Materyèl tiyo enteryè a. | / | DN25, 1" | DN25, 1" | / | |
| C se 316, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Dyamèt Nominal Tiyo Enteryè a:
| Rekòmande ≤ DN25 oswa 1". Oubyen chwazi Kalite Koneksyon Bayonèt Vacuum ak Flanj ak Boulon (soti nan DN10, 3/8" rive nan DN80, 3"), Kalite Koneksyon Soude (soti nan DN10, 3/8" rive nan DN150, 6") | Dyamèt Nominal Tiyo Eksteryè a: |
| Rekòmande pa Estanda Antrepriz Ekipman Kriyojenik HL la. Li kapab tou pwodui selon egzijans kliyan an. | Presyon konsepsyon: |
| Rekòmande ≤ 16 bar. Oubyen chwazi Kalite Koneksyon Soude a (≤40 bar) | Materyèl tiyo ekstèn lanSan okenn egzijans espesyal, materyèl tiyo enteryè a ak tiyo ekstèn lan pral chwazi menm jan an.3.2 Sistèm tiyo izole anba vakyòm dinamik3/S |
| 3.2.1 Kalite Koneksyon Bayonèt Vacuum ak Kranpon | modèl |
| Koneksyon | Kalite |
| Dyamèt nominal tiyo enteryè a | Presyon Konsepsyon |
| Materyèl | nan tiyo enteryè |
| Estanda | Remak |
HDB01008
Kalite Koneksyon Bayonèt Vacuum ak Kranpon pou Tiyo Fleksib Izole Vacuum Dinamik
lDN10, 3/8"
l8 ba
| Seri 300 an asye pur C se 316, | Materyèl tiyo enteryè a. | |
| A se 304, | B se 304L,C se 316,D se 316L, | |
| E se yon lòt. | HLH | DB01508 |
| DN15, 1/2" | Presyon konsepsyon: | Presyon konsepsyon: |
| DN20, 3/4" | Presyon konsepsyon: | Presyon konsepsyon: |
| DN25, 1" | Presyon konsepsyon: | Presyon konsepsyon: |
| Dyamèt Nominal Tiyo Eksteryè a: | Presyon konsepsyon: | Presyon konsepsyon: |
Rekòmande ≤ 8 bar. Oubyen chwazi Kalite Koneksyon Bayonèt Vacuum ak Flanj ak Boulon (≤16 bar), Kalite Koneksyon Soude (≤40 bar)Materyèl tiyo ekstèn lanSan okenn egzijans espesyal, materyèl tiyo enteryè a ak tiyo ekstèn lan pral chwazi menm jan an.
Kondisyon pouvwa:
HL-HX-X-Sit la bezwen bay ponp vakyòm yo kouran epi enfòme HL Cryogenic Equipment enfòmasyon sou elektrisite lokal la (Vòltaj ak Hertz).-00-X
3.2.2 Kalite Koneksyon Bayonèt Vacuum ak Flanj ak Boulon
modèl
Koneksyon
Kalite
Dyamèt nominal tiyo enteryè a
Presyon Konsepsyon
Materyèl
nan tiyo enteryè
Estanda
Remak
Nominal Diameter of Inner Pipe
00X
8 ~ 16 ba
DN10, 3/8"
8 ~ 16 ba
Seri 300 an asye pur
Design Pressure
Presyon konsepsyon.
08 se 8bar,
16 se 16 bar.
Materyèl tiyo enteryè a.
A se 304,
B se 304L,
C se 316,
D se 316L,
E se yon lòt.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Seri Separatè Faz Izole Vakyòm | DN10, 3/8" | Amenyen
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FranseDyamèt Nominal Tiyo Eksteryè a:X | DN15, 1/2" | |||||
| FranseRekòmande ≤ 16 bar. Oubyen chwazi Kalite Koneksyon Soude (≤40 bar).X | DN20, 3/4" | |||||
| FranseKondisyon pouvwa:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Islandè
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| Franse08 se 8bar,00X | ak 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FranseSamoan00X | DN15, 1/2" | |||||
| FranseSindhi00X | DN20, 3/4" | |||||
| FranseTajik00X | DN25, 1" | |||||
| FranseThai00X | DN32, 1-1/4" | |||||
| FranseOuzbèk00X | DN40, 1-1/2" | |||||
| FranseXhosa00X | DN50, 2" | |||||
| FranseZoulou00X | DN65, 2-1/2" | |||||
| FranseOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Kondisyon pouvwa:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | Seri 300 an asye pur | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FranseDN15, 1/2"00X | DN15, 1/2" | |||||
| FranseDN20, 3/4"00X | DN20, 3/4" | |||||
| FranseDN25, 1"00X | DN25, 1" | |||||
| FranseW03200X | DN32, 1-1/4" | |||||
| FranseW04000X | DN40, 1-1/2" | |||||
| FranseW05000X | DN50, 2" | |||||
| FranseW06500X | DN65, 2-1/2" | |||||
| FranseW08000X | DN80, 3" | |||||
| HTiyo Jakèt Vacuum00X | DN100, 4" | |||||
| HValv regilasyon koule oksijèn likid Lachin00X | DN125, 5" | |||||
| HPri an gwo Lachin Lachin ISO estanda tank 2...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSSistèm Ponp Vakyòm Dinamik00X | Seri Separatè Faz Izole Vakyòm | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FranseWhatsapp00X | DN15, 1/2" | |||||
| FranseWeChat00X | DN20, 3/4" | |||||
| FranseAlman00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Grèk
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Danwa
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLLaoX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | Amenyen
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHEstonyenX | DN15, 1/2" | |||||
| HLHFrisyenX | DN20, 3/4" | |||||
| HLHGujaratiX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Islandè
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLMalayalam00X | Maori | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDSamoan00X | DN15, 1/2" | |||||
| HLHDSindhi00X | DN20, 3/4" | |||||
| HLHDTajik00X | DN25, 1" | |||||
| HLHDThai00X | DN32, 1-1/4" | |||||
| HLHDOuzbèk00X | DN40, 1-1/2" | |||||
| HLHDXhosa00X | DN50, 2" | |||||
| HLHDZoulou00X | DN65, 2-1/2" | |||||
| HLHDOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
